I started with the fillets in the bow and stern. I think the epoxy was a bit too thin which caused a bunch of voids. Probably if it's thicker it will make better fillets. The temperature outside was nearing 100F which meant that I really only got ~1 hour of workable time with the epoxy. Good thing I didn't mix up too much of it. The big problem was that 2 hours later, when I went back to smooth the fillets, they were already too well set. Oh well. At least most of these fillets will be invisible, and the visible parts should sand smooth fairly easily.
Time: 1 hour
Total: 107 hours
No comments:
Post a Comment