Today I started sanding the inside of the boat. It went quite well, other than the frames which I sanded with the boat upside down. I also fitted the rudder and am getting ready to get that installed. Next step, more sanding on the inside, then varnish!!!
The rudder upper gudgeon was quite a pain to fit to the hull - lots of bending and hammering. The process I eventually used involved tracing the hull shape on a piece of cardboard then using a vise and a hammer to shape the gudgeon as closely as possible, then repeated trips to/from the boat refining the fit.
Time: 6 hours
Total: 149 hours
No comments:
Post a Comment